Heavy Duty Precision & Porwerful Lathe
HG-660 / 760 / 800 / 840 X 1200, 1700, 2200, 3200, 4200, 5000

*Standard accessories shall be subject to the quotation.

This machine is suitable for heavy cutting, easy operation, high tenacity, stability and heavy workload, which are good for heavy turning of mold, gear, wheel, shaft, central spindle etc.

  • 1. Base
    • Designed for heavy duty cutting; this base is made of high quality Mechanite casting and design of rigid construction increase the loading capacity and processing stability.
  • 2. Compound rest
    • Adopt 4-point tightened the rest to ensure the stability of compound rest. Wider tool post and top slide are induction hardened and ground precisely to promise a long life.
  • 3. Spindle & headstock
    • 12-step speed change, the spindle is supported by three points with bearings. G ears and spindle are made of high quality alloy carbon treated, spindle bore 80mm or 105mm, precision ground to acquire much superior hardness and tenacity.
  • 4. Gear box
    • (1) Adopt metric / inch gearbox for inch, metric, DP, MP, threading and multiple threads, all
      function is reached without any change gear, wide and complete range of threads and
      operating easily to improve production efficiency.
    • (2) Two T.P.I per inch is available for inch threading, which provide wider threading range
      than other similar specification of lathe and more convenient for operating.
  • 5. Carriage & saddle
    • The contacting surfaces with bedways are pasted with Turcite-B. The slot surface of dovetail slide way has been ultra-frequency heat treated (induction hardened and ground) to promise a long service life.
  • 6. Apron
    • Enforced oil feeding device, which ensure the slide ways with proper lubricating, effectively keep high accuracy turning, reduce the wearing of slide ways. Provide safety device to prevent the collision while turning from danger.
  • 7. Cross slide screw
    • Two point support and suitable for heavy duty turning.
  • 8. Tailstock
    • Two steps fixed device for Tailstock increase the capacity of heavy duty turning and drilling stability.
    • Two steps feeding device for easy operation.
  • 1. Follow rest
  • 2. 4-jaw independent chuck 20", 25"
  • 3. Face plate with 4-jaw 24", 26", 28", 30"
  • 4. Longitudinal & cross rapid feeding
    - only for HG-1200, 1700
  • 5. Halogen light
  • 6. Digital readout
  • 7. Back splash guard
  • 8. Quick change tool post (instead of tool post) (standard or Equrpean style)
  • 9. CE equipment
  • 10. Taper turning attachment
  • 11. Grinder
  • 12. Hydraulic copy attachment
  • 1. XZ-axes auto lubrication system
  • 2. Metric/ lnch gear box
  • 3. Coolant device
  • 4. Longitudinal apron motion feed
  • 5. Tailstock two steps device
  • 6. 3-jaw scroll chuck
  • 7. Back plate of chuck
  • 8. Steady rest
  • 9. Center sleeve
  • 10. Dead center
  • 11. Tool post screw wrench
  • 12. Level pads
  • 13. Tools & tool box
  • 14. Operation manual
  • 15. Longitudinal & cross rapid feeding
    - only for HG-2200, 3200, 4200

Unit: mm / inch

Item Model HG-660 / HG-760 / HG-800 / HG-840
1200 1700 2200
Capacity Swing over Bed 660 (25.98") 760 (29.92") 800 (31.5") 840 (33")
Swing over cross slide 400 (15.75") 500 (19.69") 540 (21.26") 580 (22.83")
Swing over gap 930 (36.61") 1030(40.55") 1070 (42.13") 1110 (43.7")
Distance between centers 1170 (46.06") 1670 (65.75") 2170 (85.43")
Bed Width of Bed 420 (16.54")
Width of gap (spindle end face) 305 ( 12")
Length of Bed 2600  (102.36") 3100  (122") 3600  (141.73")
Headstock Spindle bore diameter ø80 (3.15")    
OP: ø105 (4.13") 
Numbered of spindle speeds 12 steps
Range of spindle speeds 23-1300 r.p.m
Spindle nose A1-8   
OP: A2-8 for spindle bore :105 mm   
OP: D1-8,D2-8   
OP: A2-11 only for spindle bore 105mm
Carriage Width of Carriage 670 (26.38")
Cross slide travel 400 (15.75")
Compound rest travel HG-660,800 : 150 (5.9")  /  HG-760, 840 : 240 (9.45" )
Tool shank 25 X 25 (0.98"X0.98")
Tailstock Diameter of barrel Ø 80  (3.15")
Travel of barrel 200 (7.87")
Taper of barrel MT 5
Threads Lead screw dia.& pitch Dia.45mm.Pitch 12mm / Dia.1.77"X2 T.P.I.
Range of metric pitches 0.8~14mm (65 Nos)
Range of inch pitches 2-28 T.P.I. (36 Nos)
Range of diametrical pitches 4-56 D.P. (36 Nos)
Range of module pitches 0.5-7 M.P. (22 Nos)
Feeds Feed rod diameter 32 (1.26")
Range of longitudinal Feeds 0.05 ~ 0.7 mm/rev
Range of cross Feeds 0.025 ~ 0.35 mm/rev
Motor Main spindle Motor 10 HP (7.5kw) 
OP: 15 HP (11.25KW)
Coolant pump Motor 1/8 HP (0.1kw)
Rapid Motor 1/4 HP (0.1875 kw)
Machine Size Without back splash
guard (LXWXH)
HG-660 2600X1120X1400
(102.36"x44"x55.12")
3100X1120X1400
(122.05"x44"x55.12")
3600X1120X1400
(141.73"x44"x55.12")
HG-760 2600X1120X1450
(102.36"x44"x57.09")
3100X1120X1450
(122.05"x44"x57.09")
3600X1120X1450
(141.73"x44"x57.09")
HG-800 2600X1120X1470
(102.36"x44"x57.87")
3100X1120X1470
(122.05"x44"x57.87")
3600X1120X1470
(141.73"x44"x57.87")
HG-840 2600X1120X1490
(102.36"x44"x58.66")
3100X1120X1490
(122.05"x44"x58.66")
3600X1120X1490
(141.73"x44"x58.66")
The width of machine size with back splash guard : 1240 mm (48.81")
Measurement N.W. / G.W. (approx)
Kgs
HG-660 2900 / 2950   3100 / 3200    3300 / 3450  
HG-760 3100 / 3150   3300 / 3400   3500 / 3650  
HG-800 3180 / 3230   3380 / 3480   3580 / 3730  
HG-840 3260 / 3310   3460 / 3560 3660 / 3810  
Packing size (LxWxH) HG-660 2800x1150x1800
(110"x46"x71")
3400x1150x1800
(134"x46"x71")
3900x1150x1800
(154"x46"x71")
HG-760 2800x1150x1850
(110"x46"x73")
3400x1150x1850
(134"x46"x73")
3900x1150x1850
(154"x46"x73")
HG-800 2800x1150x1870
(110"x46"x74")
3400x1150x1870
(134"x46"x74")
3900x1150x1870
(154"x46"x74")
HG-840 2800x1150x1890
(110"x46"x75")
3400x1150x1890
(134"x46"x75")
3900x1150x1890
(154"x46"x75")
The width of packing size with back splash guard : 1400 mm (55")
  Standard Color Uper part: RAL-7035 light gray + lower part: RAL-5015 blue
  • * Except model HG-4200 series standard with straight bed, all above HG lathes are made with
    gap bed. HG-4200 series with gap bed shall be made on request.
  • * HG-5000-5200 special customized on request.
  • * We reserve the right to modify and improve our products without notice.
  • * Welcome to check with us for other specification and special purpose of functions, which is
    accepted to be customized.

Unit: mm / inch

Item Model HG-660 / HG-760 / HG-800 / HG-840
3200 4200 5000
Capacity Swing over Bed 660 (25.98") 760 (29.92") 800 (31.5") 840 (33")
Swing over cross slide 400 (15.75") 500 (19.69") 540 (21.26") 580 (22.83")
Swing over gap 930 (36.61") 1030(40.55") 1070 (42.13") 1110 (43.7")
Distance between centers 3170
(124.8")
4170
(164.17")
5000
(196.85")
Bed Width of Bed 420 (16.54")
Width of gap (spindle end face) 305 ( 12")
Length of Bed 4600
(181.1")
5600
(220.47")
6400
(251.97")
Headstock Spindle bore diameter ø80 (3.15")    
OP: ø105 (4.13") 
Numbered of spindle speeds 12 steps
Range of spindle speeds 23-1300 r.p.m
Spindle nose A1-8   
OP: A2-8 for spindle bore :105 mm   
OP: D1-8,D2-8   
OP: A2-11 only for spindle bore 105mm
Carriage Width of Carriage 670 (26.38")
Cross slide travel 400 (15.75")
Compound rest travel HG-660,800 : 150 (5.9")  /  HG-760, 840 : 240 (9.45" )
Tool shank 25 X 25 (0.98"X0.98")
Tailstock Diameter of barrel Ø 80  (3.15")
Travel of barrel 200 (7.87")
Taper of barrel MT 5
Threads Lead screw dia.& pitch Dia.45mm.Pitch 12mm / Dia.1.77"X2 T.P.I.
Range of metric pitches 0.8~14mm (65 Nos)
Range of inch pitches 2-28 T.P.I. (36 Nos)
Range of diametrical pitches 4-56 D.P. (36 Nos)
Range of module pitches 0.5-7 M.P. (22 Nos)
Feeds Feed rod diameter 32 (1.26")
Range of longitudinal Feeds 0.05 ~ 0.7 mm/rev
Range of cross Feeds 0.025 ~ 0.35 mm/rev
Motor Main spindle Motor 10 HP (7.5kw) 
OP: 15 HP (11.25KW)
Coolant pump Motor 1/8 HP (0.1kw)
Rapid Motor 1/4 HP (0.1875 kw)
Machine Size Without back splash
guard (LXWXH)
HG-660 4600X1120X1400
(181.1"x44"x55.12")
5600X1120X1400
(220.47"x44"x55.12")
6400X1120X1400
(252"x44"x55.12")
HG-760 4600X1120X1450
(181.1"x44"x57.09")
5600X1120X1450
(220.47"x44"x57.09")
6400X1120X1450
(252"x44"x57.09")
HG-800 4600X1120X1470
(181.1"x44"x57.87")
5600X1120X1470
(220.47"x44"x57.87")
6400X1120X1470
(252"x44"x57.87")
HG-840 4600X1120X1490
(181.1"x44"x58.66")
5600X1120X1470
(220.47"x44"x57.87")
6400X1120X1490
(252"x44"x58.66")
The width of machine size with back splash guard : 1240 mm (48.81")
Measurement N.W. / G.W. (approx)
Kgs
HG-660 3750 / 3950   4250 / 4450    4700 / 4900  
HG-760 3900 / 4150   4450 / 4650   4900 / 5100  
HG-800 4030 / 4230   4530 / 4730   4980 / 5180  
HG-840 4110 / 4310   4610 / 4810 5060 / 5260  
Packing size (LxWxH) HG-660 4900x1150x1800
(193"x46"x71")
5900x1150x1800
(232"x46"x71")
6700x1150x1800
(264"x46"x71")
HG-760 4900x1150x1850
(193"x46"x73")
5900x1150x1850
(232"x46"x73")
6700x1150x1850
(264"x46"x73")
HG-800 4900x1150x1870
(193"x46"x74")
5900x1150x1870
(232"x46"x74")
6700x1150x1870
(264"x46"x74")
HG-840 4900x1150x1890
(193"x46"x75")
5900x1150x1890
(232"x46"x75")
6700x1150x1890
(264"x46"x75")
The width of packing size with back splash guard : 1400 mm (55")
  Standard Color Uper part: RAL-7035 light gray + lower part: RAL-5015 blue
  • * Except model HG-4200 series standard with straight bed, all above HG lathes are made with
    gap bed. HG-4200 series with gap bed shall be made on request.
  • * HG-5000-5200 special customized on request.
  • * We reserve the right to modify and improve our products without notice.
  • * Welcome to check with us for other specification and special purpose of functions, which is
    accepted to be customized.
DENVER INDUSTRIAL CO., LTD.

Tel: 886-4-23354989Fax: 886-4-23354969E-mail: denver@ms77.hinet.net
No.258, Lane 986, Sec. 1, Shi Nan Rd., Wu Jih , Taichung 41464, Taiwan