• 1.This is a heavy duty precision CNC lathe that the function of output full horse power during
  low & high speed, available for big, special parts and mold work pieces.
• 2. The structure of Bed is adopted high toughness meehanite cast iron; stabilize properly
  parallel precision. Bed ways are induction hardened and ground.
• 3. The slide way and ball screw can be lubricated automatically by central lubrication system.
  Oil flow and lubrication frequency can be set as desired. An alarm occurs in case of lack of
  oil.
• 4. The coolant system delivers high pressure coolant to flush chips and extend tool service life.
• 5. Mechanical and electrical are designed all in one.

• 1. Transformer
• 2-1. Hydraulic 3-jaw chuck
• 2-2. 3-jaw chuck
• 2-3. 4-jaw independent chuck
• 3. Electronic 4-way turret H4
• 4. Hydraulic turret V8 or V12
• 5. Follow rest
• 6. Hydraulic steady rest
• 7. Rear chain type chip conveyor
• 8. Boring attachment
• 9. Air conditioner
• 10. Live center
• 11. Tailstock hydraulic quill
• 12.Tailstock base with auto moving

• 2-2. 3-jaw chuck 12"	2-3. 4-jaw independent chuck 20"	3. Electronic 4-way turret H4
  4. Hydraulic turret V8		8. Boring attachment

• 1. Controller : FANUC
• 2. Spindle 4-steps speed auto. change
• 3. Lubrication system
• 4. Coolant system
• 5. XZ-axes C3 ball screw
• 6. Manual 4 way tool post
• 7. Manual tailstock
• 8. Steady rest 11 1/2”
• 9. Full enclosed splash guard
• 10. Heat exchanger
• 11. Work lamp
• 12. Dead center
• 13. Manual, level pads, tools & tool box

*Standard accessories shall be subject to the quotation.

1. Controller: FANUC-Oi-T	2. Spindle 4-steps speed auto change	Spindle oil cooler system
Tailstock	Enclosed electric cabinet	High quality control components

Unit: mm / inch

	Model	DL-660 / 760 / 840
		1000	1500
Capacity	Swing over Bed	660 (26") / 760 (29.92") / 840 (33")
	Swing over cross slide	400 (15.75") / 500 (19.69") / 580 (22.84")
	Distance between centers	1000 (39.37")	1500 (59.06")
	Width of Bed	420 (16.54")
	Length of Bed	2640 (103.94")	3140 (123.62")
	Bed way of Carriage	1 mountain way + 1 box way
	Bed way of cross slide	Dovetail slide way
Headstock	Spindle bore	105 (4.13")
	Spindle nose	A2-8
	Range of spindle speed	20-1300rpm * It changed by different horsepower of Motor.
	No. of spindle speed	4 steps
Travel	X-axis travel (cross slide travel)	330(13”) / 380 (14.96”) / 420 (16.54”) by manual 4-way tool post
	Z-axis travel  (longitudinal travel)	1000 (39.37")	1500 (59.06")
		* It changed by different turret、chuck or Tailstock.
	X-axis ball screw diameter	25 mm ,  pitch 5 mm
	Z-axis ball screw diameter	50 mm ,  pitch 10 mm
Feed	X-axis rapid feed	5000 mm/min (196.85" /min)
	Z-axis rapid feed	7500 mm/min (295.28" /min)
	X-axis cutting feed rate	0-3000 mm/min (118.11" /min)
	Z-axis cutting feed rate	0-5000 mm/min (196.85" /min)
TURRET	Tool station	manual 4 way
	Size of external turning	25x25 (0.98" x0.98")
	Boring bar diameter	40 ( 1.57" )
Tailstock	Quill diameter	105 (4.13")
	Quill travel	180 (7.09")
	Taper of center	MT 6
Motor	Spindle Motor	11 kw ( 15 HP )
	X-Axis servo Motor	1.8 kw ( 2.4 HP)
	Z-Axis servo Motor	1.8 kw ( 2.4 HP)
	Hydraulic pump Motor	1.5 kw ( 2 HP)
	Coolant pump	0.75 kw  (1HP )
Measurement	N.W. / G.W. (approx) (kgs)DL-660	4600 / 4800	5200 / 5400
	N.W. / G.W. (approx) (kgs)DL-760	4900 / 5100	5500 / 5700
	N.W. / G.W. (approx) (kgs)DL-840	5100 / 5300	5700 / 5900
	Machine dimensions (L x W x H)(approx)	4340x2235x1960 (171"x88"x78")	4840x2235x1960 (191"x88"x78")
	Packing size (by1x20’container )	4500x2290x2240	5000x2290x2240
	(L x W x H)(approx)	(177"x90"x88")	(197"x90"x88")
	Standard Color	Upper parts: RAL-7035 light gray + Lower parts: RAL-7024 dark gray

* We reserve the right to modify & improve our products without notice.
* The packing size is just for reference, which will be varied by different options and guard design changed.

Unit: mm / inch

	Model	DL-660 / 760 / 840
		2000	3000	4000
Capacity	Swing over Bed	660 (26") / 760 (29.92") / 840 (33")
	Swing over cross slide	400 (15.75") / 500 (19.69") / 580 (22.84")
	Distance between centers	2000 (78.74")	3000 (118")	4000(157")
	Width of Bed	420 (16.54")
	Length of Bed	3640 (143.3")	4640 (182.68")	5640(222")
	Bed way of Carriage	1 mountain way + 1 box way
	Bed way of cross slide	Dovetail slide way
Headstock	Spindle bore	105 (4.13")
	Spindle nose	A2-8
	Range of spindle speed	20-1300rpm * It changed by different horsepower of Motor.
	No. of spindle speed	4 steps
Travel	X-axis travel (cross slide travel)	330(13”) / 380 (14.96”) / 420 (16.54”) by manual 4-way tool post
	Z-axis travel  (longitudinal travel)	2000 (78.74")	3000 (118")	4000(157")
		* It changed by different turret、chuck or Tailstock.
	X-axis ball screw diameter	25 mm ,  pitch 5 mm
	Z-axis ball screw diameter	50 mm ,  pitch 10 mm
Feed	X-axis rapid feed	5000 mm/min (196.85" /min)
	Z-axis rapid feed	7500 mm/min (295.28" /min)
	X-axis cutting feed rate	0-3000 mm/min (118.11" /min)
	Z-axis cutting feed rate	0-5000 mm/min (196.85" /min)
TURRET	Tool station	manual 4 way
	Size of external turning	25x25 (0.98" x0.98")
	Boring bar diameter	40 ( 1.57" )
Tailstock	Quill diameter	105 (4.13")
	Quill travel	180 (7.09")
	Taper of center	MT 6
Motor	Spindle Motor	11 kw ( 15 HP )
	X-Axis servo Motor	1.8 kw ( 2.4 HP)
	Z-Axis servo Motor	1.8 kw ( 2.4 HP)
	Hydraulic pump Motor	1.5 kw ( 2 HP)
	Coolant pump	0.75 kw  (1HP )
Measurement	N.W. / G.W. (approx) (kgs)DL-660	5900 / 6200	7000 / 7300	8100 / 8500
	N.W. / G.W. (approx) (kgs)DL-760	6200 / 6500	7300 / 7600	8400 / 8800
	N.W. / G.W. (approx) (kgs)DL-840	6400 / 6700	7700 / 8100	9000 / 9400
	Machine dimensions (L x W x H)(approx)	5340x2235x1960 (211"x88"x78")	6340x2235x1960 (250"x88"x78")	7340x2235x1960 (289"x88"x78")
	Packing size	5500x2290x2240	6500x2290x2240	7500x2290x2240
	(L x W x H)(approx)	(217"x90"x88")	(257"x90"x88")	(295"x90"x88")
	Standard Color	Upper parts: RAL-7035 light gray + Lower parts: RAL-7024 dark gray

* We reserve the right to modify & improve our products without notice.
* The packing size is just for reference, which will be varied by different options and guard design changed.

Model	L	W	H
DL-1000	4340	2235	1960
DL-1500	4840
DL-2000	5340
DL-3000	6340
DL-4000	7340