Heavy Duty Facing Lathe
HF-1500 / 2000 / 2500 X 1000 ( WIDTH OF BED : 79" )
We reserve the right to modify & improve the
special made products on better structure
and appearance.
*Standard accessories shall be subject to the quotation.
It is suitable for turning and cutting of large work piece and steel rod materials for heavy industries like oil pipe network, aerospace and heavy-duty shaft processing.
- 1. Base
- (1) One piece casting work with reinforced inner structure, extra 3rd support to be suitable
for processing of large work piece and enhanced heavy-duty cutting ability. - (2) The gap part base special with reinforced structure, it is no influence on cutting stability
to break the gap for necessary. - 2. Spindle
- (1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy
speed jumping and three-point support for the box. - (2) Fitted with adjustable, electromagnetic brake for easy braking adjustment according to
different work piece materials and speed. - (3) Gear and shaft are made of super alloy material with bearings to offer durable
cutting and low production noise. - (4) Sealed oil bath lubrication system with enforced oil supply by mechanical pump to
achieve better lubrication effects.
- (1) Bore 152mm, 16-step speed change, turbine speed change mechanism with no easy
- 3. Apron feeding device
- Swift transmission, positive and negative rotation movement and safety device with auto sealed oil bath lubrication & cross rapid feeding.
- 4. Saddle
- Anti-friction processed surface with regular oil injection, lubricated and friction endurable.
- 5. Electrical control
- 20HP Motor, 2 stage safety start-up device and overloading power cut system.
- 6. Castings
- FC-30 steel are used for main structures like base, spindle, saddle, which are annealed and have no deformation.
- 7. Processing
- Base, spindle, saddle, alot surface of traveling plate, tool base sliding table, tail shaft pipe are high frequency treated, precision ground for extended service life.
- 1. Strong Tailstock device
- 2. Face plate with 4-jaw 70"
- 3. Coolant device
- 4. Spindle bore (230mm) 9"
- 5. Spindle nose:A2-15
- 6. Spindle nose:A2-20
- 1. Lubricating device for Headstock
- 2. Spindle Motor :30HP
- 3. Magnetic brake
- 4. Metric / Inch gearbox
- 5. Longitudinal & cross rapid feeding
- 6. XZ-axes auto lubrication
- 7. XZ-axes with Turcite-B
- 8. Face plate with 4-jaw 60"
- 9. Dead center
- 10. Center sleeve
- 11. Tool post screw wrench
- 12. Level pads
- 13. Tools & tool box
- 14. Operation manual
Unit: mm / inch
| Model | HF-1500 | HF-2000 | HF-2500 | |
| Capacity | Swing over Bed | 1500 | 2000 | 2500 |
| Swing over cross slide | 1100 | 1600 | 2100 | |
| Distance between centers | 1000 | |||
| Bed | Swing over gap | 1900 | 2400 | 2900 |
| Width of Bed | 2010 (79") | |||
| Length of Bed | 1150 | |||
| Bed way | 3 ways | |||
| Headstock | Spindle bore diameter | 152 (6") OP: 230 (9") | ||
| Numbered of spindle speeds | 16 steps | |||
| Range of spindle speeds | 4~420 rpm | |||
| Spindle nose | ASA A2-11 / OP:A2-15,A2-20 | |||
| Top slide travel(Compound rest travel) | 370(14.57") | |||
| Max. size cutting size | 40 x 40(1.57" x 1.57") | |||
| Motor | Main spindle Motor | 30HP (22.5kw) | ||
| Coolant pump Motor | 1/8HP (0.1kw) | |||
| Color | Upper parts+ lower parts | light gray white RAL-7035 + blueRAL-5015 | ||
* The Measurement be required.
* We reserve the right to modify and improve our products without notice.
